Raspberry Pi

AC/DC Adapter 2.0A 5V
In Stock
AC Adapters

5V/2 USB Power Adapter (US)

CSDCA2005US
US$8.95
100% full load burn-in testPass LPSProtections: Short circuit / Overload / Over voltage / Over temperatureClass II power (without earth pin)2 pole USA plug
Flirc USB (v2) Flirc USB (v2)  2
In Stock
Raspberry Pi

Flirc USB (v2)

FUSBV2
US$22.00
Flirc allows you to pair any remote control with your computer or media center (Including the Raspberry Pi!). Just walk through our super simple cross platform pairing application, and you're done. Use your previously paired remote with no additional software on any machine with Flirc. It's basically a universal IR receiver, so can be used with any remote...
Raspberry Pi Compute Module 4 Antenna Kit Raspberry Pi Compute Module 4 Antenna Kit 2
In Stock
US$6.80
The official external antenna for your Compute Module 4. Certified for use with Raspberry Pi Compute Module 4.  Note: CM4 and IO board not included
USB-C Cable with On/Off Switch USB-C Cable with On/Off Switch 2
Out of Stock, Order to Reserve,
Raspberry Pi

USB-C Cable with On/Off Switch

SWUSBC
US$7.55
A super handy switch cable for your Raspberry Pi 4 Model B , removing the need to pull the USB-C connector out of your Raspberry Pi (or mess around with sockets/plugs) every time you want to power up/down.
Dupont wires 20cm 2.54mm
In Stock
Accessories

Dupont wires 20cm 2.54mm

CSDC40
US$5.25
40 Pcs of Dupont wire with 20CM length, ideal to connect for your Raspberry Pi project.
GPIO Header for PI
In Stock
Accessories

GPIO Header for Pi

GPIOHDR
US$2.35
GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header
Tiepoint Breadboard
In Stock
Raspberry Pi

Tiepoint Breadboard

CBB1655
US$10.95
This is a breadboard, good for small projects. It's 5.5 cm x 16.5 cm with a standard double-strip in the middle and two power rails on both sides.
Raspberry Pi Camera Board
In Stock, Shipping Now
Raspberry Pi

Raspberry Pi Camera Board

PICAMBRD
US$32.95
The board itself is tiny, at around 25mm x 20mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important
USB 2.0 Active Extension Cable 5m
In Stock
US$5.95
The USB 2.0 Extension Cable extend the distance between your USB peripheral and your USB hub or computer assure good signal quality to meet USB specification.
USB to TTL Serial Cable USB to TTL Serial Cable 2
In Stock, Shipping Now
Raspberry Pi

USB to TTL Serial Cable

RBUSBTTL
US$10.95
Separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link.
Micro USB Data/Power cable
In Stock
Computer Cables

Micro USB Data/Power cable

USBMICRO
US$4.25
The connector heads measure 0.51" x 0.36" x 0.25" (13.0 x 9.3 x 6.3 mm) on the USB micro B end and 0.51" x 0.55" x 0.25" (13.0 x 13.8 x 6.3 mm) on the USB A end. 
GPIO Ribbon Cable for Raspberry Pi
In Stock
Computer Cables

GPIO Ribbon Cable for Raspberry Pi

PIGPIO26
US$6.95
Raspberry Pi® computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.
Low-profile microSD card adapter
In Stock, Shipping Now
US$6.95
Make your Pi a little slimmer with this microSD card adapter board. It slides in where the SD card goes but is half the length. Pop in a microSD card for a sleeker machine. The microSD card holder is a push-push type so you can push on the edge that sticks out to remove the card when necessary. 
TFP401 HDMI/DVI Decoder
In Stock
Raspberry Pi SBCs

TFP401 HDMI/DVI Decoder

TFP401
US$27.95
TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch
Adafruit Blue&White 16x2 LCD+Keypad Kit
In Stock
US$19.95
This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.
Adafruit RGB Negative 16x2 LCD+Keypad Kit
In Stock
US$24.95
This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer. 
Flex Cable for Pi Camera - 100mm / 4"
In Stock
Computer Cables

Flex Cable for Pi Camera - 100mm / 4"

FCPI1004
US$4.75
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. 
Flex Cable for Pi Camera - 50mm / 2"
In Stock, Shipping Now
Computer Cables

Flex Cable for Pi Camera - 50mm / 2"

FCPI502
US$2.95
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Flex Cable for Pi Camera - 300mm / 12"
In Stock
Computer Cables

Flex Cable for Pi Camera - 300mm / 12"

FCPI30012
US$5.50
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Passive PoE Injector Cable Set Passive PoE Injector Cable Set 2
In Stock
US$6.80
Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable.
Industrial USB to TTL Converter Industrial USB to TTL Converter 2
In Stock
Accessories

Industrial USB to TTL Converter

IUSBTTLC
US$9.50
This industrial USB to TTL converter adopts an original FT232RL chip, providing greater stability and compatibility, enabling industrial-grade high-performance communication between a computer and TTL devices.
Sixfab Jumpstart 5G Sixfab Jumpstart 5G 2
In Stock
Raspberry Pi

Sixfab Jumpstart 5G

SF-5G
US$715.00
Sixfab Jumpstart 5G is an IoT computer based on the Raspberry Pi 4, integrated with the Quectel RM502Q-AE modem, a 5G NR Sub-6GHz variant. It combines the power of the Raspberry Pi 4 with high-speed 5G connectivity, making it ideal for various IoT applications. The product features a patent-pending Sixfab designed internal antenna that delivers excellent...
Showing 37-62 of 62 item(s)
Product added to wishlist
Product added to compare.

By using this site, you agree to cookies for a better experience. See Privacy Policy.