The ODROID H2 Net card brings 4 Additional 2.5 GbE Ethernet ports to your H2/H2+ for an incredibley low price.
There are 251 products.
ESPRESSOBin Board is a low cost high performance ARM based 64bit single board computer aimed at the networking, storage, and connectivity space.
The APU2C0 Platform is the alternate next generation of low-cost APU series (APU1D) from PC Engines. The PC Engines APU System Board is a Single Board Computer (SBC) which can be used for a variety of applications like LAN Router, Firewalls, Load Balancer, VPN-Router, Thin Clients, compact Server, NAS etc.
You can show colorful texts and pictures via USB interface with VT100/ANSI style commands without big HDMI monitor. You can connect this tiny display to your ODROID as well as Mac, Linux PC, Windows PC even an enterprise server.
This 16GB mSATA SSD Module (Updated Firmware) is perfect for use with latest APU board. Works well for Windows XP, Windows 7, Linux and MacOS10.X.
Raspberry pi best value power supply which will give you actual 5V after complete boot up. Ideal for general purpose as well, like any device with micro-USB
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
This is a handy interface bridge between Mini PCIe 3G/4G/LTE modules and Raspberry Pi. You can easily insert a Mini PCIe module in this shield then start using high-speed cellular internet with your Raspberry Pi.
You also need to get a EC25 Mini PCle 4G/LTE Module and Antennas to make this product works.
This is a single LCD module as a spare part that we’ve put into the ODROID-GO kit.
The display has 320×240 pixels and the communication interface is SPI.
APU3B2 System board is same family of PCEngines APU boards, focused on this board is 3G/LTE applications where failover between two networks capability is required or mission critical.
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
100% full load burn-in test
Pass LPS
Protections: Short circuit / Overload / Over voltage / Over temperature
Class II power (without earth pin)
2 pole USA plug
Solution for PCEngines & MikroTik boards in a 19" 1U rack mount enclosure to install in data center. Ideal for redundant or high performance firewalls, VPN solutions, VOIP solutions and more, great choice to rack mount low power and fanless boards.
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
Indoor Black/Blue/Red Enclosures for PCEngines APU4 boards.
APU3B4 System board is same family of PCEngines APU boards, focused on this board is 3G/LTE applications where failover between two networks capability is required or mission critical.
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C1. 2x13 tall female header is already soldered on the PCB.
Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay.
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems.
Supports SATA Interface rate of 6Gb/s
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
PCEngines Indoor Red Enclosure is designed for Following boards.
ALIX2D13, APU1, APU2 and APU3 models.
PCEngines Indoor Red Enclosure for APU & ALIX2D13 is designed for Following boards
APU Series
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM with optimized for 3G/LTE Modems.
Next batch Expected end of may
Ideal product for your custom projects with 5-inch multi-touch screen for ODROID gives users ability to create all-in-one. A great choice for projects such as tablets, game console and embedded systems.
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 2GB DDR3-1333 DRAM.
What's new and different from the VU7+?
* AUDIO JACK: The VU7A+ (Audio) is meant to be used with sound! Plug in your own speakers or earbuds/headphones into the audio jack (3.5mm)
Exact specifications as per Hardkernel. Suitable for all Odroid-XU4 with HDD, Switching adapter with US plug, with FCC. ROHS and CEC compliant
Cable is made of 24AWG pure copper listed pair conduits with 50u" gold plated contacts (short body). Most budget cables skimp with 10u". 350 MHz Category 5E Patch Cord (UTP)
PCEngines Indoor Black Enclosure designed for ALIX2D13 and APU1, APU2 and APU3 Series boards.
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 4 Intel i211AT & 4GB DDR3-1333 DRAM.
High quality stable and low noise power supply for ODROID-HC2, ODROID-C4 and ODROID-N2+
Laser Acrylic enclosure for the 3.5 Inch LCD Shield.
PC Engines ALix 2D3/2D13, APU and OpenVox IPC100/IPC110/IPC120 enclosure with 2 x 2.5" HDD Mounting and 2 optional LAN, 2 WiFi, black.
It is a high performance mini-ITX embedded board with AMD GX Series (Quad-Core) CPU 1GHz with 64 bit and 2MB L2 cache featuring 3 Intel i211AT & DDR3-1333 DRAM.
Ultra high-performance and low power consumption
Supports dynamic power management and SMART
TRIM Command Supported
PCEngines Indoor Blue Enclosure for APU & ALIX2D13 is designed for ALIX2D13, APU1D, APU1D4 boards