Fusion2Go 5G Fleet boosts voice, text, and data speeds on all 5G and 4G phones for all Canadian carriers. The FIRST and ONLY ultra-wideband vehicle cell booster in Canada that amplifies 7 frequency bands, including bands 66 & 7 of the high-capacity 5G spectrum for ultra-fast data speeds and high-quality voice over 5G (VoNR-5G).
Optimized for semi-trucks, trucks, fleets and RVs, SureCall’s rugged and powerful Fusion2Go 5G OTR provides constant connectivity for any vehicle in challenging signal areas.
Keep your fleet of vehicles connected throughout the most challenging signal areas with the Fusion2Go 3.0 Fleet, the most powerful cell phone signal booster for commercial drivers, boundary pushers, law enforcement, or public safety officials who require a fixed antenna solution.
Boost 5G and 4G data speeds and significantly reduce dropped calls in your home, cabin, or basement office with SureCall’s Flare Plus cell phone signal booster.
Designed for top performance in rural areas, the SureCall SC-200W-58 exterior antenna helps improve cell signal inside any car, truck, van, or SUV when paired with a vehicle signal booster.
SureCall's Force5 2.0 is an alternative solution to a DAS at a fraction of the cost. Force5 2.0 increases signal strength for voice, text, 4G LTE and 5G on all Canadian cellular carriers, up to 80,000 sq ft.
Boost 5G signal inside any vehicle and enjoy constant cellular connectivity in-between towers and even in the most challenging signal areas with the Fusion2Go 5G from SureCall.
Stay connected anywhere with SureCall's heavy-duty OTR truck antenna that is equipped with a strong base and mirror mount that can hold up in the harshest conditions.
Designed for mid-sized urban offices and commercial buildings, the Fusion5X 2.0™ boosts 5G, 4G, and LTE cellular signals on all phones and devices for all Canadian cell carriers, including Telus, Bell and Rogers. Configurable for all indoor environments, Fusion5X 2.0 provides up to 25,000 sq ft of indoor coverage in strong signal areas.
Stay connected on the road with Fusion2Go OTR, the most powerful vehicle cell signal booster that includes SureCall’s high-performance truck antenna optimized for semi-trucks, big rigs, sprinter vans, fleets, RVs, or any other large vehicle.
Designed for mid-sized offices and commercial buildings, the Fusion5X 2.0 booster enhances voice, text, 3G, 4G LTE, and 5G data for all Canadian cellular carriers. It supplies up to 25,000 sq. ft coverage in strong signal environments
Designed for maximum performance in rural areas, the SureCall Yagi Antenna is a directional outdoor antenna with a range of up to 30 miles for the most remote signal booster applications.
Designed for mid-sized offices and commercial buildings, the Fusion5X 2.0 booster enhances voice, text, 3G, 4G LTE, and 5G data for all Canadian cellular carriers. It supplies up to 25,000 sq. ft coverage in strong signal environments
SureCall Fusion2Go 3.0 RV cell phone signal booster provides the maximum gain and power possible, ensuring seamless cellular connectivity in remote areas. Increases voice, text and 4G LTE, 5G signal strength for all Canadian cell carriers. Supports multiple users inside any RV or motorhome.
Quickly measure signal strength, map indoor frequency levels and identify peak antenna alignment for cell phone signal boosters with the SureCall RF signal meter. Optimize installation by measuring signal levels for LTE, AWS, PCS and Cellular frequencies for all North American cell carriers.
SureCall’s bi-directional splitters enable 3 inside antennas to be supported from a single amplifier or node. This accessory is great for deploying multiple antennas all of which are approximately the same distance from the amplifier and are thus suitable for an even distribution of signal strength.
Designed to blend seamlessly into any environment, this SureCall 5G ultra thin antenna is a low-profile ceiling antenna for in-building cell phone signal boosters. The ultra-wideband indoor antenna is omni-directional and transmits and receives signal in a 360 degree pattern. It is designed to cover 2G/3G/4G/5G and WLAN systems for Cellular, PCS, AWS, and...
Ubiquiti UniFi Outdoor Weatherproof Utility Network Device Enclosure for the UniFi Switch Flex - White
The USW Flex Utility is an outdoor weatherproof enclosure designed for use with the UniFi Switch Flex, USW-Flex. It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily...
Ubiquiti UISP airMAX PowerBeam AC 2.4-GHz 18-dBi 400-mm Bridge - White
Ubiquiti launches the latest generation of airMAX® CPE (Customer Premises Equipment), the PowerBeam® 2AC, with dedicated Wi-Fi management. The PowerBeam 2AC directs RF energy in a tighter beamwidth.
Ubiquiti UISP airFiber 5XHD 5-GHz 1-Gbps Point to Point Carrier Backhaul Radio - White
The AF-5XHD was designed specifically for the Wireless ISP industry from the ground floor up, the AF-5XHD's custom LTU silicon and radio architecture provide breakthrough performance.
Ubiquiti 802.3at PoE Injector for U6-LR/PRO - White
The 802.3at PoE+ Injector (U PoE AT) is designed to power 802.3at PoE+ devices. The U PoE AT delivers up to 30W of PoE+ that can be used to power the Access Point WiFi 6 Long-range (U6 LR), Pro (U6 Pro), and other devices that adhere to the 802.3at PoE+ standard.
Ubiquiti UISP airMAX NanoStation AC Loco 5-GHz 13-dBi MIMO TDMA CPE - 5-pack - White
The indoor/outdoor NanoStation AC loco is compact, high-performance CPEs featuring airMAX AC technology and a dedicated Wi-Fi radio for management
Ubiquiti UniFi Wi-Fi 5 AC Mesh Pro AP MIMO Outdoor Access Point with Plug & Play Mesh - White
With the outdoor UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Dual-Band Access Point from Ubiquiti, users benefit from a wide coverage area reaching up to 600' along with enhanced data transfer rates of up to 1300 Mbps on the 5 GHz frequency.
OpenWrt One/AP-24.XY router board based on MediaTek MT7981B (Filogic 820) SoC and MediaTek MT7976C dual-band WiFi 6 chipset
OpenWRT official board and support
MediaTek MT7981B (Filogic 820) SoC
Dual-band WiFI 6 via MediaTek MT7976C (2×2 2.4 GHz + 3×3/2×2 + zero-wait DFS 5Ghz)
1GB DDR4
1 x 2.5GbE RJ45 port and |1 x Gigabit Ethernet RJ45 port
256MB SPI NAND...
It is a power adapter specifically designed for UP7000, UP 4000, UPS V2, and UPC Plus single-board computers. It provides 12 volts at 5 amps, delivering 60 watts of power. This power supply ensures these boards receive the stable and adequate power required for their operation.
Note that the power cord is not included and must be purchased separately.
Banana Pi BPI-RK3588 Stamp hole Core board adopts Rockchip RK3588 design, adopts core board + baseboard development board suite, supports 8G memory,32G eMMC storage, supports 32G maximum memory and 128G maximum EMMC storage, can be convenient for all kinds of development and flexible base plate customization quickly mass production of products.
*Banana...
The BananaPi BPI-CM4IO board is a versatile interface board designed to be compatible with both the Banana Pi BPI-CM4 and the Raspberry Pi CM4 modules. It facilitates the integration of these compute modules into various applications by providing essential connectivity options and peripheral interfaces, making it ideal for development projects that...
BananaPi BPI-CM4 new design with Amlogic A311D Quad core ARM Cortex-A73 and dual core ARM Cortex-A53 CPU ,ARM G52 MP4(6EE) GPU,NPU for AI at 5.0 TOPS, support Camera and MIPI-CSI interface ,HDMI output,2 Gigabit port. 4G RAM and 16 GB eMMC flash.
*Banana Pi Official Distributor
The 12v 5Amp power adapter is for the Boingfire BFN Series boards, ensuring optimal performance and compatibility. It is crafted with precision, resulting in minimal power loss, ensuring energy-efficient and consistent power delivery. Built to last, the adapter is shielded with robust materials, minimizing wear and tear. As a testament to its reliability...
This High Speed HDMI Cable provides a one-cable solution for your home entertainment needs. As a versatile HDMI cable, it provides high-definition quality for not only LattePanda, but also home entertainment networking or mini PCs such as Raspberry Pi, Cubieboard, PCduino, etc.
The BFN1K is a powerful and versatile multi-purpose system designed to meet a wide range of needs, from open-source projects to proprietary software solutions. System comes with 1 year standard Warranty, extended warranty will extend your warranty to 3 Years.
We launched ODROID-M1 about 20 months ago and have supplied it to many B2B and B2C customers. Feedback from many customers requested a lower price, more GPIO ports, lower power consumption, a slimmer form factor, and a variety of practical peripherals.
The 12v 2Amp power adapter is for the Boingfire BFN4 Series boards, ensuring optimal performance and compatibility. It is crafted with precision, resulting in minimal power loss, ensuring energy-efficient and consistent power delivery. Built to last, the adapter is shielded with robust materials, minimizing wear and tear. As a testament to its reliability...
The Boingfire BFN1 system board, leverages the power of the Quad-Core Intel Atom E3845 running at 1.9GHz. It offers diverse storage options and robust Ethernet channels, ensuring efficient data handling and connectivity. Designed for durability, it operates seamlessly in varied temperatures and features a fanless cooling mechanism for silent operation....
This industrial USB to TTL converter adopts an original FT232RL chip, providing greater stability and compatibility, enabling industrial-grade high-performance communication between a computer and TTL devices.
Every single IoT project includes different types of inputs and outputs, physically. With infinite numbers of possibilities, developers need their own custom machined enclosures. That enclosure brings flexibility to add/remove cable interfaces to your project in seconds. IP54 rated lid and grommets enable your project’s environmental robustness. Projects...
This ODROID-HC1 case is a highly recommended accessory to protect your ODROID-HC1 from physical damage and dust. The compact and durable design ensures a snug fit for the single-board computer and offers easy access to all ports and interfaces. The case also features a cooling fan and heatsink for optimal thermal management.
The IP based Power Switch is a simple product that automatically power-cycles any device when internet connectivity is lost or you want to do it manually. This is one of the best power solution for remote locations where you have to send tech only for power cycle.
Raspberry pi best value power supply which will give you actual 5V after complete boot up. Ideal for general purpose as well, like any device with micro-USB
