Reference: ODHC1CCASE
Highly recommended item to protect a ODROID-HC1.
Data sheet
Highly recommended item to protect a ODROID-HC1.
* Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs
* Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
* 1Gbyte DDR3 SDRAM
* eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
Pre-installed Android version.
The semi-transparent case has openings for all outputs including the GPIO port making it a great fit projects that are connected to external hardware.
This “Case Type 1” is designed for the user who needs high bandwidth network with the high capacity storages for the high performance computing system.
"ODROID-GO Advance Black Edition" is a DIY Game kit just like the older version ODROID-GO.
Center is positive(RED wire) and outer is negative(BLACK wire)
Infrared remote controller
12 Keys function
37.9Khz Carrier Frequency
NEC standard protocol
The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI’s high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz
The LED Matrix Shield is also great for making scrolling displays. In our example codes, we set it up so words flow from one matrix to the other.
This is a perfect connector pack for various DIY projects with the ODROID-C0. You need a soldering skill to use this pack.
Note: Input voltage should be no more than rated voltage,or the module will be burnt
IEEE 802.11ac/a/b/g/n WLAN module with on-board 2.4Ghz and 5.8Ghz Dual band antenna.
This heatsink might be useful for who needs the full throttled quad-core performance with ODROID-C1.
