ODROID
US$33.75
The 19V/7A Power Supply is a high-performance and reliable power supply designed to meet the power requirements of high-end electronic devices, including ODROID boards. It provides stable power with overvoltage and overcurrent protection, ensuring safe and efficient operation. Its compact and durable design makes it an ideal choice for your power-hungry...
US$94.50
SmartPower 3 is an intelligent power switch designed for ODROID boards and other SBCs. It provides a safe and efficient way to turn on and off your device, as well as monitor the power usage and temperature in real-time. With its compact size and easy-to-use interface, SmartPower 3 is an essential tool for any ODROID project.
US$1.75
The eMMC Module Reader is a versatile and reliable tool that simplifies accessing data on eMMC storage modules. Its USB connectivity and compatibility with various operating systems enable effortless reading and writing of data on the module. With its compact, portable design, it's perfect for professionals working with eMMC modules. Its durability and...
US$19.35
Easier and faster way to flash your OS image into the eMMC Module. With this unit, you will not need a separate USB card reader. Just attach your eMMC module directly to your PC/Mac via this writer board. The module writer supports various speeds and capacities of eMMC modules and provides a faster write speed than its predecessor, the USB2.0 eMMC Module...
US$5.27
Use this USB-DC Power Bridge board with ODROID-XU4 to connect ODROID-VU7 or VU7 Plus
US$26.00
This MIPI camera kit has an OV5647 sensor chip which can capture up to 5 Mpixel images and 720p/30fps video streaming. You can get reasonably good imaging whether it is in the daytime or at night thanks to the automatically switchable IR-Cut filter and two IR Lights. Realtime image inputs from the MIPI-CSI port can be widely used for Machine-Learning...
US$22.75
Compatible with ODROID U3/U2/XU/XU/XU3/C1/XU4/C0/C2 with the latest OS version. Only Image Preview and Video call are possible in Android platform.
US$59.95
The UPS2 for C1 is designed specifically for the ODROID-C1. Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut...
US$8.95
Blue illuminated Power Button with pre-assembled jumper wires.
US$59.95
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.
US$4.59
RTC backup battery Lithium primary battery to back up the RTC on XU board. This battery can keep the RTC running up to 5 years without external power supply.
US$8.00
Lithium Polymer rechargeable cell with a protection circuit.
US$15.60
Lithium Polymer rechargeable cell with a protection circuit.
US$2.25
Note: Input voltage should be no more than rated voltage,or the module will be burnt
US$13.70
A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a...
US$53.95
SmartPower2 is a power-supply which has WiFi connectivity to control the voltage and switch on/off a connected device.
US$2.43
This is a perfect connector pack for various DIY projects with the ODROID-C0. You need a soldering skill to use this pack.
US$14.50
A new and upgraded version of the USB-UART Module Kit featuring a USB-C Port.