Reference: ODH2NC4
The ODROID H2 Net card brings 4 Additional 2.5 GbE Ethernet ports to your H2/H2+ for an incredibley low price.
The ODROID H2 Net card brings 4 additional 2.5 GbE Ethernet ports for an incredible low price. It is compatible with the H2, H2 rev. B and H2+. Using a H2+ you end up with a total of 6 x 2.5 GbE Ethernet ports. With the H2 and H2 rev. B you get 2 x 1 GbE and 4 x 2.5 GbE Ethernet ports.
The ODROID H2/H2+ with the ODROID H2 Net card brings new capabilities and applications. Examples (non-exhaustive list):
Note: In the network throughput, those two charts show slightly different numbers so it looks like the upload speed is slower than the download speed. But it is not, because the logging tool which I used shows the actual throughput in E+06 formula, like “2.30e+06” rather than using the Mbps unit. In fact, all the NICs performed at 2.34~2.36 Gbits in both directions.
Warning: Have to flash GLK-ESF BIOS to use H2 Net Card properly.
Data sheet
The ODROID H2 Net card brings 4 Additional 2.5 GbE Ethernet ports to your H2/H2+ for an incredibley low price.
Center is positive(RED wire) and outer is negative(BLACK wire)
Pre-installed Android version.
Additional boards for DIY projects or Arduino Camp? This is a spare part for ODROID-GO kit.
Power Supply compatible with SmartPower3.
IEEE 802.11ac/a/b/g/n WLAN module with on-board 2.4Ghz and 5.8Ghz Dual band antenna.
A new and upgraded version of the USB-UART Module Kit featuring a USB-C Port.
The UPS2 for C1 is designed specifically for the ODROID-C1.
Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID-C1
3.5mm male plug to 3 RCA female adapter cable(Red, White, Yellow) connectors for Audio and/or Video devices
he Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and Wi-Fi communication module.
4 channel IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V.
This is a single LCD module as a spare part that we’ve put into the ODROID-GO kit.
The display has 320×240 pixels and the communication interface is SPI.
The CloudShell-2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support.
This Odroid Case Type 5 is made for the user who needs high bandwidth network with high capacity storages for the strong performing computing system.
The Universal Motion Joypad is a new game controller that is similar to the steering wheel available for the Nintendo Wii.
RTC backup battery Lithium primary battery to back up the RTC on XU board. This battery can keep the RTC running up to 5 years without external power supply.
