A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a...
The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI’s high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz
SmartPower 3 is an intelligent power switch designed for ODROID boards and other SBCs. It provides a safe and efficient way to turn on and off your device, as well as monitor the power usage and temperature in real-time. With its compact size and easy-to-use interface, SmartPower 3 is an essential tool for any ODROID project.
The board itself is tiny, at around 25mm x 20mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important
The UPS2 for C1 is designed specifically for the ODROID-C1. Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut...
Use Spade Wire fork terminal with 19" DualBoard Enclosure System for ALIX/APU Boards (CASEDUALBOARD2) and AC to DC Internal Power Supply 35W (RS-35-12).
IP68 Rated Outdoor Weatherproof field replaceable RJ45 Ethernet connector system. 15CM shielded Cat5e cable.Cat5e RJ45 Plug 8P8C. The system features a shielded RJ45
This MIPI camera kit has an OV5647 sensor chip which can capture up to 5 Mpixel images and 720p/30fps video streaming. You can get reasonably good imaging whether it is in the daytime or at night thanks to the automatically switchable IR-Cut filter and two IR Lights. Realtime image inputs from the MIPI-CSI port can be widely used for Machine-Learning...
The 19V/7A Power Supply is a high-performance and reliable power supply designed to meet the power requirements of high-end electronic devices, including ODROID boards. It provides stable power with overvoltage and overcurrent protection, ensuring safe and efficient operation. Its compact and durable design makes it an ideal choice for your power-hungry...
Do you want your Raspberry Pi with a more modern and stylish design? Here comes Argon ONE. An aluminum case for your Raspberry Pi board to give it a more decent look.
USB-C 24W Adapter, with USB-C power delivery. This new adapter is meant for use with Edge SBCs, as well as the new VIM3. Onboard controller negotiates the power supply needed by your SBC using the USB-C cable.
The sleek design of the Case Type 2 complements the modern aesthetic of the ODROID-H2 board. The ODROID-H2 Case Type 4 is ideal for users who require high-bandwidth networking with mid-range storage. Its fanless design allows for the dissipation of heated air from the processor and drives, while two 92mm holes on top provide additional ventilation.
Enclosure designed for ALIX.2* boards and APU2C0. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
USB-C 30W Adapter, with USB-C power delivery. This new adapter is meant for use with VIM4 SBCs. An onboard controller negotiates the power supply needed by your SBC using the USB-C cable.
Designed to keep your Raspberry Pi 4 Model B cool, our case features 'hex' ventilation paired with a 5V cooling fan (included). Also includes a set of rubber feet!
how much words is this: The ODROID-H2 Case Type 5 is designed for users who require high-bandwidth networking and high-capacity storage for a high-performing computing system. Its durable construction and easy access to all ports ensure optimal connectivity and customization, while the fanless design dissipates heat effectively for reliable operation....
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
ALIX2D13 is a compact system board designed for embedded applications. Powered by a 500 MHz AMD Geode LX800 processor and 256 MB DDR DRAM, it supports various operating systems including Linux, FreeBSD, NetBSD, OpenBSD, FreeDOS, and more. With 3 Ethernet channels, a compact flash socket, and a 44 pin IDE header, it's a versatile choice for network...
The perfect home for your new Raspberry Pi 4. We will ensure our case is adjusted to fit the latest Raspberry Pi specifications.
Note "Only tested for the Raspberry Pi 4B"
Does not support Pi 3B+, 3B, or 2
U3 IO Shield is the board that can be plugged on the neat of ODROID-U3 via tiny 8 pin IO connector. You can have 36 IO ports of GPIO/PWM/ADC. The shape and dimension are exactly same as ODROID-U3. It comes with 12pcs of PCB spacers for easier and solid stacking assembly.
Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant.
The New M2X Extension board is an ultra-thin version of the Original M2X Board. It has M.2 slots for adding a 4G LTE module and NVMe SSD to your VIM3, 3L or Edge-V. A nano-SIM card slot is built into the board.
This robust metal enclosure has been designed specifically for the official Raspberry Pi Compute Module 4 IO board and comes complete with fixings, a cooling fan and a bonus included screwdriver.
The ODROID-H2 Case Type 7 is designed for users who require high-bandwidth networking with mid-range storage capacity. Its fanless design and top-mounted ventilation holes provide efficient heat dissipation, while easy access to all ports allows for optimal connectivity and customization. This case is an ideal accessory to protect and enhance the...
The ESPRESSOBin power supply is a compact size AC adapter, saves space on power strips. Input voltage 100-240 V AC, 47-63 Hz. Output voltage 12 V DC, maximum current 2.0A. High efficiency. 2.5 mm jack, center positive.
PC Engines Remote Display Kit for POST4D connects with POST4D PCI POST card. Its 20 inch cable allows display to be placed in a more suitable location.
The ALIX2D2 is a compact system board designed for embedded applications. Powered by a 500 MHz AMD Geode LX800 processor and 256 MB DDR DRAM, it features two Ethernet channels, dual USB ports, a DB9 serial port, and a CompactFlash socket with a 44 pin IDE header for storage. The board also has two miniPCI slots and LPC bus for expansion, and can be...
DR6018 V4 based on IPQ6010 chipset is an enterprise wireless module integrated with 2x25Ghigh power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
