Banana Pi OpenWrt One Router
Banana Pi OpenWrt One Router
Banana Pi OpenWrt One Router
Banana Pi OpenWrt One Router
  • New
Banana Pi OpenWrt One Router
Banana Pi OpenWrt One Router
Banana Pi OpenWrt One Router
Banana Pi OpenWrt One Router

Banana Pi OpenWrt One Router

Directly Ship from Canada
US$120.00

The “OpenWrt One/AP-24.XY” router board based on MediaTek MT7981B (Filogic 820) SoC and MediaTek MT7976C dual-band WiFi 6 chipset.It is the first official development board of the OpenWRT open source community.

Complete assembled kit with assembled system, power adapter, antennas.

Description

OpenWrt One is a device based on the MediaTek Filogic 820 SoC that has WiFi 6, dual-band, 3×3/2×2, 1 x 2.5Gbit WAN, 1 x 1Gbit LAN, 1GB DDR4 RAM, 256 MiB NAND, 16 MiB NOR, M.2 SSD and USB 2.0.

OpenWrt One uses Mediatek’s MT7981B SoC with a dual-arm Cortex-a53 core at 1.3 GHz, 1 GB DDR4 RAM and 256 MiB SPI NAND storage. It also integrates 16 MiB of additional protected storage as a system backup, dual storage hardware to ensure that the onboard system is unbrickable, and finally integrated M.2. 2230/2242 NVMe PCIe 2 X1 ports can be used to add external storage. And with a battery holder for an internal clock, OpenWrt One offers a USB 2.0 Type-A and a mikroBUS expansion port to provide more interfaces to a host of technical possibilities

OpenWrt One is the first board design with OpenWrt opensource communtity.and designed in collaboration with Banana Pi that will also handle manufacturing and distribution of the router board. The OpenWrt One/AP-24.XY router should provide a source of income for the project, for example, to cover the cost of hosting and OpenWrt conferences, with Banana Pi selling the board through their distribution network, and for every device sold, donating to the Software Freedom Conservancy (SDC) with the funds earmarked for OpenWrt.

MediaTek MT7981B(Filogic 820)

MediaTek MT7981B is a compact Wi-Fi System-on-Chip (SoC) for IoT devices that includes an embedded TCP/IP stack. Using the MT7981B an IoT device can connect to other smart devices or to cloud applications and services. Connectivity on the MT7981B is achieved using Wi-Fi in either Wi-Fi station or access point (AP) modes.

Key Features

  • OpenWrt official board and support

  • MediaTek MT7981B (Filogic 820) SoC

  • Dual-band WiFI 6 via MediaTek MT7976C (2×2 2.4 GHz + 3×3 5Ghz)

  • 1GB DDR4

  • 1 x 2.5GbE RJ45 port and |1 x Gigabit Ethernet RJ45 port

  • 256 MiB SPI NAND and 16 MiB SPI NOR flash are used to make the board almost unbrickable

  • M.2 2242/2230 socket for NVMe SSD (PCIe gen 2 x1)

  • RTC support

  • PoE support

  • MikroBUS socket for expansion modules

Application direction

  • Maker DIY

  • OpenWrt learning and development

  • IoT

  • Wifi router

  • Nas

  • Network communication application

Hardware interface

Banana pi OpenWrt One
 

Hardware spec

HardWare Specification of OpenWrt One

SoC

MediaTek MT7981B (Filogic 820) dual-core Cortex-A53 processor @ 1.3 GHz

System Memory

1GB DDR4

Storage

256 MB SPI NAND flash for U-boot and Linux

16 MB SPI NOR flash for write-protected (by default) recovery bootloader (reflashing can be enabled with a jumper)

Two types of flash devices are used to make the board almost unbrickable

M.2 2242/2230 socket for NVMe SSD (PCIe gen 2 x1)

Networking

1 x 2.5GbE RJ45 port

1 x Gigabit Ethernet RJ45 port

Dual-band WiFI 6 via MediaTek MT7976C (2×2 2.4 GHz + 3×3/2×2 + zero-wait DFS 5Ghz)

3x MMCX antenna connectors

USB

1x USB 2.0 Type-A host port

USB Type-C (device, console) port using Holtek HT42B534-2 UART to USB chip

Expansion

MikroBUS socket for expansion modules

Debugging

Console via USB-C port or 3-pin header, 10-pin JTAG/SWD header for main SoC

RTC

support RTC onboard

Misc

Reset and User buttons

Boot select switch: NAND (regular) or NOR (recovery)

2x PWM LEDs, 2x Ethernet LED (GPIO driven)

EM6324 External hardware watchdog

NXP PCF8563TS (I2C) RTC with battery backup holder for CR1220 coin-cell

Power Supply

15V USB-PD on USB-C port

Optional 802.3at/af PoE via RT5040 module

Dimensions

148 x 100.5 mm compatible with Banana Pi BPI-R4 case design

Certifications

FCC/EC/RoHS compliance

Product Details

BPIOPWRTONE

Reviews (0)

No reviews

16 other products in the same category:

Product added to wishlist

By using this site, you agree to cookies for a better experience. See Privacy Policy.